Multi Tubes Vortexer provides efficient mixing and stirring of multiple samples simultaneously. This vortexer is equipped with a durable platform to accommodate multiple tubes and vials, and its variable speed settings enable the creation of a vortex motion to thoroughly coalesce liquids and reagents within the tubes
Multi Tubes Vortexer is designed for mechanical and chemical cell lysis, mixing suspensions, and general sample agitation. This vortex mixer gives a distinctly different motion than shaking a sample. With vortexing. greater shearing forces are placed on materials in the bottom of a tube, thus promoting either disruption or solubility. The Multi-Tube Vortex mixer is a tool to provide that extra degree of mixing, however, it accommodates full racks of tubes or microwell plates, vials, or cylinders as opposed to single tubes. Consequently, this unit is useful for higher throughput mixing of samples.
This vortexer is designed to hold multiple test tubes, vials, or cylinders. The vortexing action is created by securing the top of the vessel in place while allowing the bottom to move freely in a defined 3.6mm eccentric orbit. Two posts hold support plate securely in place for a quiet, rattle-free mixing. The support plate is easily adjusted by loosening knobs and lifting the plate up and down. The circular groove around the top of the taller post allows the support plate to swing away from the tray for easy removal of samples. The suction-cup feet dampen motion and prevent sliding on the work surface. Equipped with a powerful, permanent magnet motor with sealed ball bearings.
The variable speed microprocessor control provides consistent uniform mixing action
Touchpad controls with easy-to-read, independent LCD displays for speed and time allow the operator to view both settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. The timer will display elapsed time or, when programmed to a user-defined limit, will shut off the unit when time reaches zero. The display will show the last used settings, even after power has been turned off.
Programmable pulsing mode allows the user to adjust the pulse-on and pulse-off times between 1 and 59 seconds in 1-second intervals. This feature enhances the vortex action by creating a more vigorous mix
||500 to 2500
||1 sec to 160 Hrs.
|Maximum Weight Capacity
||24 x 15 ml
|Tray Dimensions (L x W) mm
||313 x 180
|Overall Dimensions (W x D x H)mm
||400 x 325 x 430
Supply: 220-240 Volts 50 Hz Single Phase.
* Maximum speed will vary depending on load